Patriot 4WD L4-2.0L (2008)
Fuel Gauge Sender: Service and Repair
Fuel Pump Module - Removal
AWD
WARNING: Release fuel system pressure before servicing fuel system components. Service vehicles in well ventilated areas and avoid ignition
sources. Never smoke while servicing the vehicle. This may result in personal injury or death.
1. Perform Fuel System Pressure Release procedure. See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Fuel Pressure
Release/Service and Repair
2. Remove the air cleaner lid, disconnect the inlet air temperature sensor and makeup air hose.
3. Remove the negative battery cable.
4. Remove the rear seat cushion.