Patriot 4WD L4-2.4L (2009)
WARNING: A reservoir blocker must be installed on the master cylinder brake fluid reservoir. Failure to install the reservoir blocker can
result in fire in the event of an accident, resulting in serious or fatal injury.
10. If not present, a reservoir blocker (1) must be installed on the fluid reservoir (2). The blocker can be removed from the original reservoir by
releasing the retaining tab (3) and opening the blocker. To install the blocker, encircle the reservoir neck with the blocker, close the blocker,
snapping the retaining tab into place. Make sure the blocker is securely latched.
11. Connect the negative (ground) cable on the battery.
12. Fill the master cylinder reservoir to the proper level.
WARNING: Be certain a firm brake pedal is achieved prior to attempting to operate the vehicle. If a firm brake pedal cannot be achieved,
bleed the brake hydraulic system and check for leaks. See: Brake Bleeding/Service and Repair
13. Road test the vehicle to ensure proper operation of the brakes.