Patriot 4WD L4-2.4L (2009)
6. Remove the disc brake caliper (2) lower guide pin bolt (1).
CAUTION: When moving rear brake caliper upward, use extreme care not to damage or overextend the flex hose. Damage may occur.
7. Rotate the caliper upward hinging off the upper guide pin bolt. Rotate the caliper upward just enough to allow brake rotor removal. Hang the
caliper assembly in this position using wire or a bungee cord.
8. Remove any clips (2) retaining the brake rotor (3) to the wheel mounting studs.
9. Slide the brake rotor (3) off the hub and bearing (1).