jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Radio/Stereo Noise Filter|Removal|Page 8580 > < Radio/Stereo Noise Filter|Removal|Page 8578
Page 2
background image

1. Install strap and bolt to rear floor pan. Tighten bolt to 8 Nm (71 in. lbs.).

2. Install strap and bolt to muffler. Tighten bolt to 8 Nm (71 in. lbs.).

3. Connect battery negative cable.

RADIO NOISE SUPPRESSION CAPACITOR

1. Install capacitor and bolt.

2. Connect electrical harness connector to capacitor.

3. Connect battery negative cable.

STRUT BRACKET TO BODY GROUND STRAP

1. Install strap to frame rail.

Radio/Stereo Noise Filter|Removal|Page 8580 > < Radio/Stereo Noise Filter|Removal|Page 8578