Patriot 4WD L4-2.4L VIN W (2007)
8. Install the pressure hose (3) at the pump pressure port (5). Tighten the tube nut to 32 Nm (24 ft. lbs.).
9. Install the pressure hose routing bracket bolt (2) to the upper mount (8).
10. All except 2.4L Engine with All-Wheel-Drive - Position the pressure hose routing clamp (2) at the exhaust manifold and install the mounting bolt
(1). Tighten the bolt to 9 Nm (80 in. lbs.).
11. 2.4L Engine with All-Wheel-Drive - Position the pressure hose routing clamp (2) at the exhaust manifold and install the mounting bolt (1). Tighten
the bolt to 9 Nm (80 in. lbs.).
