Patriot 4WD L4-2.4L VIN W (2007)
13. Remove the return hose from the vehicle.
Installation
INSTALLATION
1. Install the power steering return hose (7) into the engine compartment.
2. Install the return hose routing clamp screw (1) securing the return hose (7) to the strut tower.
3. Install the return hose onto the cooler tubes (5) and install the hose clamps (6).
4. Raise and support the vehicle.
5. Install the screw (2) securing the return hose to the frame rail. Tighten the screw to 19 Nm (14 ft. lbs.).
6. Install the return hose (1) at the return tube (2).
7. Lower the vehicle.
8. Install the front fascia.
9. Install the windshield washer reservoir.
10. Install the power steering fluid reservoir.
11. Install the coolant recovery bottle.
12. Fill and bleed the power steering system.
13. Check for leaks.
14. Install the engine appearance cover.
