Patriot 4WD L4-2.4L VIN W (2007)
14. Clamp (1) tripod joint sealing boot (4) to tripod joint (2) using required procedure for type of boot clamp application. If seal boot uses crimp type
boot clamp, clamp sealing boot onto tripod housing using Clamp C-4975-A (3). Place Clamp C-4975-A over bridge of clamp (1).
15. Tighten nut on Clamp C-4975-A (3) until jaws on tool (3) are closed completely together (4), face-to-face.
16. If seal boot (3) uses low profile latching type boot clamp, clamp sealing boot onto tripod housing using Clamping Tool, Snap-On(R) YA3050 (2)
(or an equivalent). Place prongs of Clamp Locking Tool in the holes of the clamp (1).