Patriot 4WD L4-2.4L VIN W (2007)
Rear Door Window Glass: Service and Repair
Removal
REMOVAL
1. Remove the door trim module (1).
2. Remove the two screws and remove the foam block.
3. Remove the inner belt weatherstrip (1) from the door using the Remover, Outer Door Belt Molding 9093 special tool, if necessary.
4. Remove the rear door glass foam blocker and slide the glass down and out of the glass track (2).
5. Remove the screws (1) and remove the glass run assembly (2) from the door.