jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Check Valve, Washer|Removal|Page 11040 > < Check Valve, Washer|Description|Page 11037
Page 1
background image

Check Valve: Service and Repair
Removal

REMOVAL

1. Disconnect and isolate the battery negative cable.

2. Partially remove the trim from the right upper D-pillar (4).

3. Pull the headliner (5) away from the upper liftgate opening header (1) far enough to access and disconnect the liftgate washer supply hose (6) and

the headliner washer supply hose (3) from the barbed nipple on each side of the check valve (2).

4. Remove the check valve.

Check Valve, Washer|Removal|Page 11040 > < Check Valve, Washer|Description|Page 11037