Scrambler L4-150 2.5L VIN U 1-bbl (1983)
Fig. 2 - FLOORPAN SEAM
4.
Seal the body side panel-to-front floorpan seams indicated in Fig. 2 with silicone sealer. Do both sides and the entire length of the side
panel-to-floor pan seam.
Fig. 3 - FLOORPAN HOLE PLUGS
5.
Install hole plugs, P/ N 4004285, in any open floorpan hole(s) (Fig. 3) and seal all floorpan hole plugs from the underside of the vehicle with
silicone sealer (Fig. 3).
6.
Seal all underbody hole plugs from the underside of the vehicle with silicone sealer.