Wagoneer L6-242 4.0L VIN M FI (1988)
Tilt And Remove Or Install Caliper
Remove Or Install Slide Pins
3. Install the caliper and the caliper mounting pins. Torque the pins to 34-47 Nm (25-35 ft. lbs.).
4. Fill the master cylinder reservoirs to the full level.
5. Press firmly on the brake pedal to seat the brake pads.
6. Install the wheels, torque to 102 Nm (75 ft. lbs.),
7. Lower the vehicle and check the master cylinder fluid level, correct if necessary.
8. Check for proper brake system operation.