Wagoneer L6-258 4.2L VIN C 2-bbl (1982)
Brake Shoe: Service and Repair
Removal
Fig. 1 Drum brake assembly.
1.
Raise and support vehicle.
2.
Remove wheel and tire assemblies.
3.
Release parking brake and loosen lock nuts at parking brake equalizer.
4.
Remove rear drum-to-hub locating screws, if equipped.
5.
Remove drums.
6.
Remove primary return spring, then the automatic adjuster actuating spring and secondary shoe return spring.
7.
Remove hold-down springs and brake shoe assemblies.
8.
On rear brakes, disengage parking brake cable from parking brake lever.
9.
Place suitable clamp over ends of wheel cylinder.