Wagoneer L6-258 4.2L VIN C 2-bbl (1982)
6.
Adjust the carburetor curb (slow) idle speed adjustment screw (J) to obtain the specified curb (slow) idle speed rpm. Refer to the Vehicle Emission
Control Information label.
7.
Apply a direct source of 34-51 kPa (10-15 in. Hg) vacuum to the vacuum actuator (K). Use Hand Operated Vacuum Pump Tool J-23738-A, or
equivalent.
8.
Increase the engine speed to above 1200 rpm for 3 to 5 seconds and allow the engine to return to curb idle speed.
9.
With the Sole-Vac throttle positioner fully extended, turn the vacuum actuator adjustment screw (L) on the throttle lever until the specified engine
