Testing and Inspection: Air Manifold, Hose | Wagoneer L6-258 42L VIN C 2-bbl (1982)
Air Injection Tube: Testing and Inspection
Air Manifold, Hose
1. Inspect all hoses for deterioration or holes.
2. Inspect all tubes for cracks or holes.
3. Check all tube and hose routing as interference may cause wear.
4. Check all hose and tube connections.
5. If a leak is suspected on the pressure side of the system, or any tubes and/or hoses have been disconnected on the pressure side, the connections
should he checked for leaks with a soapy water solution. With the pump running, bubbles will form if a leak exists.
6. To replace any hose or tube, note the routing, then remove the hose(s) or tube(s) as required.
CAUTION: The hoses used with this system are made of special material to withstand high temperature. No other type hose should be substituted.