Wagoneer L6-258 4.2L VIN C 2-bbl (1982)
Curb Idle Speed and Sole-Vac Throttle Positioner
1.
Disconnect the vacuum hose (G) from the Sole-Vac vacuum actuator and plug it.
2.
Disconnect the Sole-Vac holding solenoid wire connector (H).
3.
Start the engine.
4.
Place manual transmissions in NEUTRAL and automatic transmissions in DRIVE. Set the parking brake firmly.
5.
Increase the engine speed to above 1200 rpm for 3 to 5 seconds and allow the engine to return to curb idle speed.