Wagoneer L6-258 4.2L VIN C 2-bbl (1982)
2.
Disconnect the Sole-Vac holding solenoid wire connector (H).
3.
Start the engine.
4.
Place manual transmissions in NEUTRAL and automatic transmissions in DRIVE. Set the parking brake firmly.
5.
Increase the engine speed to above 1200 rpm for 3 to 5 seconds and allow the engine to return to curb idle speed.
6.
Adjust the carburetor curb (slow) idle speed adjustment screw (J) to obtain the specified curb (slow) idle speed rpm. Refer to the Vehicle Emission
Control Information label.