Wagoneer L6-258 4.2L VIN C 2-bbl (1982)
21. Install steering shaft snap ring onto sleeve of compressor tool and position tool onto steering shaft.
22. Compress lock plate and install snap ring into steering shaft groove.
23. Remove compressor tool. Ensure snap ring is completely seated before removing compressor tool.
24. Install lock plate cover.
25. Remove support fixture tool J-23074 from steering column.
26. Install column mounting bracket. Torque bracket attaching bolts to 20 ft. lbs. on all except 1984 - 87 Cherokee and Wagoneer, 1986 - 87
Commanche and 1987 Wrangler models. Torque bracket attaching bolts to 22 ft. lbs. on 1984 - 87 Cherokee, Wagoneer and Commanche models
or 21 ft. lbs. on 1987 Wrangler.
27. Install steering wheel. Torque nut to 30 ft. lbs.
28. Install column bezel.
29. Install and torque column bracket-to-instrument panel bolts to 20 ft. lbs.
30. Torque toe plate bolts to 10 ft. lbs. on all except 1984 - 87 Cherokee, Wagoneer and 1986 - 87 Commanche. Torque toe plate bolts to 6 ft. lbs. on
1984 - 87 Cherokee, Wagoneer and 1986 - 87 Commanche models.
Models With Automatic Transmission
