jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

Mirrors - Installing Low Profile for Trailer Towing|Page 393 > < Wheel Fastener|Specifications
Page 1
background image

Towing Information: All Technical Service Bulletins
Mirrors - Installing Low Profile for Trailer Towing

AUGUST 1984 000 259
CHEROKEE/WAGONEER 70 SERIES
25E
ACCESSORIES

Attention: Workshop, Parts Department

LOW PROFILE MIRRORS

Information

This I.S. Note contains instructions for installing the low profile trailer tow mirror on a Cherokee/ Wagoneer 70 Series replacement door.

Mirror installation is as follows.

FIGURE 1 - LAYOUT DIMENSIONS FOR MIRROR MOUNTING HOLES

Procedure

1.

Layout and mark location of mirror upper and lower mounting holes A and B as shown in Figure 1, prior to painting door.

2.

Center punch and drill two, 1/8-inch diameter mounting holes at location B (Fig. 1).

3.

Center punch and drill 1/8-inch diameter pilot holes at mounting hole locations A (Fig. 1). Then drill mounting hole A to final 3/8-inch diameter
size.

Mirrors - Installing Low Profile for Trailer Towing|Page 393 > < Wheel Fastener|Specifications