Wrangler L4-150 2.5L VIN E TBI (1990)
Lock Cylinder Removal. Less Ignition Switch Retaining Screw
13.
On models less lock cylinder retaining screw, rotate lock cylinder two detents clockwise beyond the Off-Unlock position. Insert a thin blade
screwdriver through slot in steering column, then depress lock cylinder retaining tab and remove lock cylinder.
Lock Cylinder Removal. W/ignition Lock Retaining Screw
14.
On models with lock cylinder retaining screw, remove screw and pull lock cylinder from housing.
15.
On all models, reverse procedure to install. On models with lock cylinder retaining screw, torque screw to 40 inch lbs.
