Wrangler L4-150 2.5L VIN P MFI (1993)
**20 Nm (180 in. lbs.)**.
1.
Remove the intake/exhaust manifold per service manual procedures to gain access to the broken stud(s).
2.
Remove the outer studs from the cylinder head. Use a stud removal tool if possible or drill the broken stud from the head.
3.
Install two new outer studs p/n 06036193AA into the cylinder block. **Torque the studs to 14 Nm (126 in. lbs.)**.
4.
Clean any carbon deposits or debris from the exhaust manifold.
5.
Reinstall the exhaust manifold. **Use only the new parts listed above to attach the outer ends (Figure 2).**
5.
Torque the bolts in the order and specification as listed in Figure 2.
**NOTE:
THE TORQUE SPECIFICATION FOR THE OUTER EXHAUST MANIFOLD STUDS HAVE BEEN REDUCED TO 20 NM (180 IN. LBS.)**
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
09-45-01-92
2.0 Hrs.
FAILURE CODE: P8 - New Part