Wrangler L4-150 2.5L VIN P MFI (1993)
Manifold Pressure/Vacuum Sensor: Service and Repair
Manifold Absolute Pressure (MAP) Sensor
NOTE:
The MAP sensor is located on the dash panel at the rear of the engine cylinder head cover.
REMOVAL
1.
Disconnect the MAP sensor electrical connector.
2.
Disconnect the MAP sensor vacuum supply hose.
3.
Remove the MAP sensor mounting nuts and remove MAP sensor.
INSTALLATION
1.
Install MAP sensor to dash panel and secure with mounting nuts.
2.
Install the MAP sensor vacuum supply hose.
3.
Connect the MAP sensor electrical connector.