Wrangler L4-2.4L VIN 1 (2006)
![background image](/jeep/wrangler/l4-2.4l_vin_1/Page-2101001.png)
Front Door Interior Handle: Service and Repair
Full Door
INSIDE HANDLE ACTUATOR
REMOVAL
1. Remove the torx screw attaching the inside handle to the door.
2. Carefully pull the handle from the door.
Fig. 10
3. Disconnect the latch rods from the handle (Fig. 10).
INSTALLATION
1. Connect the latch rods to the handle.
2. Position handle and seal in door.
3. Install the torx screw attaching the inside handle the to door.