Wrangler L4-2.4L VIN 1 (2006)
Pressure Regulating Solenoid: Service and Repair
AUTOMATIC TRANSMISSION - 42RLE
SOLENOID/PRESSURE SWITCH ASSEMBLY
REMOVAL
NOTE: If the Solenoid/Pressure Switch Assembly is being replaced, the Quick Learn Procedure must be performed.
1. Raise vehicle on hoist.
2. Remove valve body assembly from transmission.
Fig. 239 Solenoid Retaining Screws
3. Remove Solenoid/Pressure Switch Assembly retaining screws (2) from solenoid (Fig. 239).
Fig. 240 Solenoid/Pressure Switch Assembly and Screen
4. Remove Solenoid/Pressure Switch Assembly (1) and screen from valve body (2) (Fig. 240).
INSTALLATION
NOTE: If the Solenoid/Pressure Switch assembly is being replaced, the Quick Learn Procedure must be performed. Refer to Transmission Control
Systems. See: Testing and Inspection/Programming and Relearning