Wrangler L4-2.4L VIN 1 (2006)
Ignition Shut Down Relay (For Antitheft): Service and Repair
AUTO SHUT DOWN RELAY
The ASD relay is located in the Power Distribution Center (PDC)
REMOVAL
Power Distribution Center (PDC)
1. Remove PDC cover.
2. Remove relay from PDC.
3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.
INSTALLATION
Power Distribution Center (PDC)
1. Install relay to PDC.
2. Install cover to PDC.