Wrangler L4-2.4L VIN 1 (2006)
3. Apply a light coating of gear lubricant on the lip of pinion seal and install seal with an appropriate installer (Fig. 43).
Fig. 44 PINION YOKE INSTALLER
4. Install yoke with Installer W-162-D, Cup 8109 and Spanner Wrench 6958 (Fig. 44).
5. Install pinion washer and new nut and tighten nut to 217 Nm (160 ft. lbs.).
CAUTION: Never loosen pinion gear nut to decrease pinion gear bearing rotating torque and never exceed specified preload torque. Failure to
heed caution may result in damage.
Fig. 45 YOKE SPANNER WRENCH