Wrangler L4-2.4L VIN 1 (2006)
Universal Joint: Service and Repair
Universal Joint - Single Cardan
Disassembly
UNIVERSAL JOINT - SINGLE CARDAN
DISASSEMBLY
NOTE: Individual components of cardan universal joints are not serviceable, they must be replaced as an assembly.
1. Tap the outside of the bearing cap assembly with a drift to loosen the snap rings.
Fig. 16 YOKE SNAP RING
2. Remove snap rings from both sides of yoke (Fig. 16).
3. Position a socket with a inside diameter large enough to receive the bearing cap beneath the yoke on the press.
4. Position yoke with the grease fitting if equipped, pointing up.