Wrangler L4-24L VIN 1 (2006) Drive Axles, Bearings and Joints Axle Bearing Repair | 194RBI
Axle Bearing: Service and Repair
194RBI
BEARING - AXLE
REMOVAL
1. Remove axle shaft.
2. Remove axle shaft seal from axle shaft tube with a small pry bar.
Fig. 27 AXLE SHAFT BEARING TOOLS
3. Remove axle shaft bearing from the axle tube with Bearing Removal Tool Set 6310 and Adapter Foot 6310-5 (Fig. 27).
INSTALLATION
1. Wipe axle shaft tube bore clean.
2. Install axle shaft bearing with Installer 6436 and Handle C-4171.
NOTE: Part number on the bearing must be against the installer.