Wrangler L4-2.5L VIN P (1999)
Driver Side Airbag Trim Cover Retainer Remove/Install - W/Speed Control
4. Remove the four nuts that secure the upper and lower trim cover retainers to the studs on the back of the driver side airbag housing.
5. Remove the upper and lower trim cover retainers from the airbag housing studs.
6. Remove the horn switch ground wire eyelet from the upper airbag housing stud.
Driver Side Airbag Trim Cover Remove/Install - W/o Speed Control
Driver Side Airbag Trim Cover Remove/Install
7. Disengage the six trim cover locking blocks from the lip around the outside edge of the driver side airbag housing and remove the housing from
the cover.
INSTALLATION