Wrangler L4-2.5L VIN P (1999)
Electronic Noise Suppressor: Specifications
Tighten the nut that secures the engine-to-body ground strap eyelet to the stud on the left upper rear corner of the engine cylinder head nut to 5.6 Nm (50
in. lbs.).
Tighten the screw that secures the engine-to-body ground strap eyelet to the dash panel. Tighten the screw to 48.5 Nm (430 in. lbs.).
Tighten the screw that secures the engine-to-body ground strap eyelet to the hood panel center reinforcement screw to 1.9 Nm (17 in. lbs.).
Tighten the screw that secures the engine-to-frame ground strap eyelet to the top of the right frame rail screw to 22.6 Nm (200 in. lbs.).
Tighten the nut that secures the engine-to-frame ground strap eyelet to the forward ignition coil mounting stud on the right side of the engine nut to 22.6
Nm (200 in. lbs.).