Wrangler L4-2.5L VIN P (1999)
Power Steering Fluid Reservoir: Service and Repair
REMOVAL
1. Remove the pump return hoses from the reservoir and drain the reservoir.
Pump Reservoir - 2.5L
2. Remove the push-in fastener from the reservoir.
3. Slide the reservoir up out of the fan shroud mount.
INSTALLATION
1. Slide reservoir down onto the fan shroud mount until it clicks in place.
2. Install the push-in fastener.
3. Install the hoses.
4. Fill reservoir to proper level, refer to Power Steering Pump Initial Operation.