Wrangler L4-2.5L VIN P (1999)
Wiper Motor: Specifications
Tighten the mounting hardware as follows:
Wiper motor screws - 6 N.m (53 in. lbs.)
Crank arm nut - 11.5 N.m (101 in. lbs.)
Wiper module bracket screws - 7.9 N.m (70 in. lbs.)
Cowl plenum cover/grille panel screws - 1.7 N.m (15 in. lbs.).
Wiper motor output shaft nut - 3.3 N.m (30 in. lbs.)
Liftglass hinge nut - 6 N.m (53 in. lbs.)
Wiper motor cover screws - 1.1 N.m (10 in. lbs.).