Wrangler L6-4.0L VIN S (2000)
Front Door Latch: Service and Repair
Full Door
LATCH
REMOVAL
1. Remove trim panel.
2. Roll window to full upward position.
Fig. 11
3. Disconnect the lock cylinder to latch rod. (Fig. 11) (4) Disconnect the lock knob to latch rod.
5. Disconnect the outside handle to latch release rod.
6. Remove the screws attaching the latch to the door.
7. Lower the latch in the door and disconnect the inside handle to latch rod.
8. Remove the latch from the door.
INSTALLATION
1. Position the latch in the door.
2. Connect the inside handle to latch rod.
3. Install the screws attaching the latch to door.
4. Position the door weatherstrip in place, adhesive as necessary.
5. Connect the outside handle to latch rod.
6. Connect the lock knob to latch rod.
7. Connect the lock cylinder to latch rod.
8. Install trim panel.
