Wrangler L6-4.0L VIN S (2000)
6. Route the fog lamp (if equipped), park lamp and side marker wire harness through the access hole in the fender well. Seat the grommet.
7. Engage the headlamp wire connector.
8. Engage the battery temperature sensor connector.
9. Engage the vacuum line at the reservoir under the battery tray reinforcement bracket.
10. Position the front end lighting wire harness into the retainers on the fender. Engage the retainers to secure.
11. Position the high pressure air conditioning line into the retainer on the fender. Engage the retainer to secure.
12. Position the PDC on the fender and install the bolts.
13. Position the PDC wire harness into the retainers on the fender and battery tray. Engage the retainers to secure.
14. Install the air cleaner housing.
15. Install the battery tray.