Wrangler L6-4.0L VIN S (2000)
Trim Panel: Service and Repair
Front Door Trim Panel
FULL DOOR TRIM PANEL
REMOVAL
1. Lower the window.
2. Remove the clip attaching the window glass regulator handle to the regulator. Remove the handle.
Fig.17 Full Door Trim Panel
3. Remove the screws attaching trim panel to door.
4. Remove push-in fasteners attaching trim panel to door with special tool C-4829.
5. Lift the trim panel upward and separate the trim panel from the door.
INSTALLATION
1. Position the trim panel on the door.
2. Press the push-in fasteners attaching trim panel to door into place.
3. Install the screws attaching trim panel to door.
4. Position the clip on regulator handle and install the handle on the regulator.
