Wrangler L6-4.0L VIN S (2000)
Tailgate Latch: Service and Repair
TAILGATE LATCH REMOVAL
Fig. 3
1. Open the tailgate and remove the latch trim cover (Fig. 3).
2. Disconnect the outside handle to latch rod.
3. Disconnect the lock cylinder to latch rod.
4. Remove the screw attaching latch to tailgate.
5. Separate the latch from the tailgate.
INSTALLATION
1. Position the latch in the tailgate.
2. Install the screw attaching latch to tailgate. Do not tighten screw.
3. Connect the lock cylinder to latch rod.
4. Connect the outside handle to latch rod.
5. Install the latch trim cover.
