Wrangler L6-4.0L VIN S (2000)
![background image](/jeep/wrangler/l6-4.0l_vin_s/Page-515002.png)
2. Position isolator mount into mount bracket and install through bolt and nut. DO NOT tighten the bolt at this time.
3. Lower the transmission.
4. Remove the transmission support.
5. Install the mount fastening bolts and tighten to 54 Nm (40 ft. lbs.) torque.
6. Tighten the through bolt nut to 50 Nm (37 ft. lbs.).
7. Lower the vehicle.
8. Connect the negative cable to the battery.