Wrangler L6-4.0L VIN S (2000)
![background image](/jeep/wrangler/l6-4.0l_vin_s/Page-614002.png)
4. Install the rear crossmember. Tighten the crossmember-to-sill bolts to 41 Nm (30 ft. lbs.) torque. Remove the support from the transmission.
5. Coat the oxygen sensors with anti-seize compound. Install the sensors and tighten the nut to 30 Nm (22 ft. lbs.) torque.
6. Lower the vehicle.
7. Start the engine and inspect for exhaust leaks and exhaust system contact with the body panels. Adjust the alignment, if needed.