Wrangler L6-4.0L VIN S (2000)
Dome Lamp Bulb: Service and Repair
REMOVAL
Sound Bar Dome Lamp Bulb Removal
1. Insert a small flat blade between the lamp housing and lamp lens. Carefully pry lamp lens to disengage lens retaining tabs.
2. Separate lens from lamp housing.
3. Grasp bulb and pull from lamp.
Cargo Area Dome Lamp Bulb Removal
Cargo Area Dome Lamp
1. Remove the dome/cargo lamp lens by squeezing it at the lens at the top and bottom. This will separate the lens retaining tabs from the lamp
housing shoulders.
2. Remove the lens from the lamp housing.
3. Pull the bulb straight out to remove from the bulb holder.
INSTALLATION
Sound Bar Dome Lamp Bulb Installation
1. Position bulb in lamp socket and press into place.
2. Position lamp lens on lamp housing and press into place.
Cargo Area Dome Lamp Bulb Installation
1. Insert the replacement bulb in the bulb holder.
2. Position lens at the lamp housing and press into the housing until the retainer tabs are seated.
