Wrangler L6-4.0L VIN S (2000)
Fuse Block: Description and Operation
FUSEBLOCK MODULE
Fuseblock Module Location
An electrical fuseblock module is mounted on the dash panel in the passenger compartment of the vehicle. The fuseblock module serves to
distribute electrical current to many of the accessory systems in the vehicle. The fuseblock module houses up to twenty blade-type mini fuses.
The molded plastic fuseblock module housing has an integral mounting bracket that is secured with two screws to a bracket welded on the dash
panel just above the heater and air conditioner housing.
The glove box is rolled down from the instrument panel for service access of the fuseblock module fuses. An adhesive-backed fuse layout map is
located on the heater and air conditioner housing below the fuseblock module to ensure proper fuse identification.
The fuseblock module is integral to the cross body wire harness. If any internal circuit or the fuseblock module housing is faulty or damaged, the
entire fuseblock module and cross body harness unit must be replaced.
All of the circuits entering and leaving the fuseblock module do so through the cross body wire harness. Internal connection of all of the fuseblock
module circuits is accomplished by an intricate combination of hard wiring and bus bars.
