Wrangler L6-4.0L VIN S (2000)
INSTALLATION
1. Position canister dowel pins into rubber bushings.
2. Install canister mounting bolt.
3. Tighten bolt to 9 N.m (80 in. lbs.) torque.
4. Connect vacuum lines/hoses at EVAP canister.
INSTALLATION
1. Position canister dowel pins into rubber bushings.
2. Install canister mounting bolt.
3. Tighten bolt to 9 N.m (80 in. lbs.) torque.
4. Connect vacuum lines/hoses at EVAP canister.