Wrangler L6-4.0L VIN S (2000)
Air Filter Element: Service and Repair
REMOVAL
Air Cleaner Element
1. Loosen air tube clamp at housing cover.
2. Disconnect air tube at cover.
3. Pry back the clips retaining air cleaner cover to air cleaner housing.
4. Lift cover up to expose air cleaner element.
5. Remove air cleaner element.
6. Clean inside of air cleaner housing and its cover before installing new element.
INSTALLATION
1. Install air cleaner element into housing.
2. Install housing cover to housing. Be sure cover is properly seated to air cleaner housing.
3. Connect air tube at cover.