jeep Workshop Repair Guides

Jeep Workshop Service and Repair Manuals

ABOUT US
Oil Pressure Sensor > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Specifications|Page 1837

Wrangler L6-4.0L VIN S (2000)

Page 2
background image

1. Remove air cleaner intake tube at throttle body.
2. Remove two MAP sensor mounting bolts (screws).
3. While removing MAP sensor, slide the rubber L-shaped fitting from throttle body.
4. Remove rubber L-shaped fitting from MAP sensor.

INSTALLATION

1. Install rubber L-shaped fitting to MAP sensor.
2. Position sensor to throttle body while guiding rubber fitting over throttle body vacuum nipple.
3. Install MAP sensor mounting bolts (screws). Tighten screws to 3 N.m (25 in. lbs.) torque.
4. Install air cleaner intake tube.

Oil Pressure Sensor > < Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor]|Specifications|Page 1837