Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Intake Air Temperature Sensor: Service and Repair
INTAKE MANIFOLD AIR TEMPERATURE SENSOR
Fig. 45 Intake Air Sensor Location-Typical-4.0L Shown
The intake manifold air temperature sensor is installed into the intake manifold plenum near the throttle body (Fig. 45).
REMOVALL
1
Disconnect electrical connector from sensor.
2
Remove sensor from intake manifold.
INSTALLATION
1
Install sensor into intake manifold. Tighten sensor to 28 Nm (20 ft. lbs.) torque.
2
Connect electrical connector to sensor.