Wrangler 4WD L4-150 2.5L VIN P MFI (1998)
Seals and Gaskets: Service and Repair
Hub Bearing and Axle Shaft
If the axle shaft and hub bearing are being removed in order to service another component, the axle shaft and hub bearing can be removed as an
assembly.
REMOVAL
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper and rotor.
4. Remove ABS wheel speed sensor, if necessary.
Hub, Knuckle And Axle Shaft
5. Remove the cotter pin, nut retainer, and axle hub nut, if necessary.
Hub Bearing Bolt
6. Remove the hub to knuckle bolts.
7. Remove the hub from the steering knuckle and axle shaft, if necessary.