Wrangler 4WD V6-3.8L (2009)
Rear Door Window Glass: Service and Repair
Rear Door Glass - Removal
Full Rear Door
REMOVAL
1. Remove the carrier plate (6), See: Service and Repair/Rear Full Door Carrier Plate - Removal
2. Remove the nut (2) and position the run channel (1) aside.
3. Lower the glass into the bottom of the door.
4. Remove the outer belt molding.
5. Remove the stationary glass division bar bolt and separate the stationary glass and weatherstrip assembly from the door.
6. Remove the door glass from the door window opening.
Half Rear Door
REMOVAL