Wrangler 4WD V6-3.8L (2009)
Hood Hinge: Service and Repair
Hood Hinge - Removal
REMOVAL
1. Remove the cowl top panel (3), See: Cowl/Cowl Moulding / Trim/Service and Repair/Cowl Panel Cover - Removal.
NOTE: It is not necessary to remove the hood to replace the hood hinges. Hood hinges can be replaced one at a time.
2. Support the hood with a suitable device.
3. Remove the hinge to body bolts (2).
4. Using a grease pencil or equivalent, mark location of hood hinges (1) on hood (3) to aid installation.