Wrangler 4WD V6-3.8L (2009)
Parking Brake Warning Switch: Description and Operation
Parking Brake Switch - Description
DESCRIPTION
The park brake switch (1) is located on the park brake lever mechanism on the floor panel transmission tunnel below the center floor console. This
switch includes a spade-type output terminal (2) that connects the switch to the vehicle electrical system through a dedicated take out and connector of
the instrument panel wire harness. The output terminal is integral to the stationary contact within a molded plastic insulator. A locating tab (4) on the
insulator engages a slot in the park brake lever mechanism for positive switch location. External to the insulator is a movable leaf contact (3) with an
integral grounding lug on one end and an integral actuating lever and follower on the opposite end. The switch is secured to and grounded by a single
screw to the park brake lever mechanism.
The park brake switch cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.