Rio L4-1.6L (2004)
^
When installing the connecting rods, match marks made on the connecting rod and cap to reference mark made on cylinder block to prevent oil
starvation to the connecting rod bearings.
^
When installing the piston assembly into cylinder block, position the piston between TDC and BDC, then install the cylinder head in order to
prevent pistons and valves from contacts which may cause damage.
19. Loosen and remove connecting rod caps.
20. Check the connecting rod bearing clearance.
21. If oil clearance exceeds maximum oil clearance specification, grind the crankshaft and use undersized connecting rod bearings.
1) Connecting rod bearing selection table
2) Connecting rod bearing housing bore size
