Workshop Manuals Factory service & repair Land Rover
01 General and service information02 Engine03 Fuel, emissions and engine management04 Cooling system05 Manifolds and exhaust06 Transmission and axles07 Steering and suspension08 Brakes09 Wheels and tyres10 Body, trim and restraints11 Heating and air conditioning12 Electrical and instruments13 Service and recall actions
Land Rover Defender Technical Bulletins07 · Steering and suspension
07 · Steering & suspension

Steering damper rattle

Make
Land Rover
Model
Defender Technical Bulletins
Section
Steering damper rattle › Steering damper rattle
Steering and suspensionSteering damper rattle

STEERING DAMPER RATTLE

Model
Defender
Affected vehicles
From 994360 to 111544
Date
1997-04-30
Reference
30/04/97
Steering Damper Rattle – bulletin page 1

Bulletin text

Steering Damper - Rattle

MODEL

Defender

DETAIL

We have received a small number of reports which indicate a rattle emanating from the steering damper, investigations have shown that the damper is not being clamped in the bracket tightly enough due to the thickness of the stem washer.

A new stem washer has been introduced which has a reduced thickness, this will allow the stem to sit into the mounting brackets correctly to achieve the necessary clamping.

ACTION REQUIRED

Upon customer complaint of a rattle emanating from the steering, the new stem washer should be fitted as detailed below.

PARTS INFORMATION

Old part 543819 Stem washer

New part ANR 6942 Stem washer

PROCEDURE

Refer to the workshop manual section 57 steering damper for procedure.

© Rover Group 1996

30/04/97

57/02/97/EN

AFFECTED VEHICLES

LP LH LJ LD From 994360 to 111544

WARRANTY

Normal warranty policy and procedures apply

COMP. CODE

5E1K

SRO

57.55.21 Fit new stem washers 00.20 hour

Parts & tools for this job For Land Rover Defender

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.