Rear Seat Squab for 90 - Chassis and Body Upgrade
CHASSIS AND BODY
17
REPAIR
REAR SEAT CUSHION - 90
Service repair no - 78.10.18/99
Remove
1. Release seat cushion stowage strap.
2. Remove 4 bolts and spring washers and lift seat
cushion from pivot brackets.
3. Remove 4 bolts, plain washers, spring washers
and nuts. Detach both pivot brackets from wheel
arch.
Refit
4. Secure pivot brackets to wheel arch and tighten
bolts to
10 Nm (7 lbf/ft).
5. Position seat cushion in pivot brackets and
secure with 4 bolts and spring washers.
6. Fit stowage strap.
REAR SEAT SQUAB - 90
Service repair no - 78.10.58/99
Remove
1. Release seat cushion stowage strap and lower
seat cushion.
2. Slacken 2 bolts securing seat squab brackets to
body side.
3. Remove 2 bolts, plain washers, spring washers
and nuts securing seat squab to wheel arch.
4. Lift seat squab and release brackets from
retaining bolts.
Refit
5. Lower seat squab brackets over retaining bolts,
tighten bolts to
10 Nm (7 lbf/ft).
6. Secure seat squab to wheel arch, tighten bolts to
10 Nm (7 lbf/ft).
7. Raise seat cushion and fit stowage strap.